Question: Where do you buy a Christmas present for a friend who has everything and wants to be British?
Answer: Nowhere. You make a Union Jack pillow for her!
I got to use my Mom's sewing area for this project. It's a great place to spend an afternoon. You can't see it in this picture, but the view is really of the hills behind my parents' house.
I started with a 16-inch pillow form and red, white and blue fabrics. For a little added fun, I purchased a red on red patterned fabric.
I didn't free-hand this project, but I didn't have a pattern, either. I based it on an image that I found on Google. Here it is on my new iPhone!!
And then I measured. A lot.
These are the approximate measurements I used:
- blue fabric
- 18 x 18 inch square for the front
- 2 - 18 x 12 inch rectangles to create an envelope opening on the back
- 144 x 6 inch piece for the ruffle. I sewed together three 48 x 6 pieces.
- white fabric
- 2 - 18 x 5 inch strips for the horizontal and vertical strips
- 2 - 25 x 3 inch strips for the diagonal strips
- red fabric
- 2 - 18 x 3 inch strips for the horizontal and vertical strips
- 2 - 25 x 2 inch strips for the vertical strips
After all of the measuring, I cut everything. And then I ironed. A lot. I ironed each strip with a half an inch on each side, so the finished pieces measured 18 x 4 and 25 x 2 inches for the white strips and 18 x 2 and 25 x 1 inches for the red strips.
For the diagonal strips, I sewed the red on top of the white off-centered. If you look at the flag image, you can see that the strip from the upper left to lower right corner is the same all the way across. However, the strip from the upper right to lower left corner is different on the top half than it is on the bottom. To achieve this, I cut the strip in half so I could invert it before I sewed it to the blue fabric.
I stitched both pieces to the blue fabric, and then I pinned and stitched the other diagonal piece to the blue fabric.
Next, I pinned the horizontal white strip over the diagonal strips and sewed it to the blue fabric.
The next step was to stitch the vertical white strip perpendicular to the horizontal strip. Once this was done, I pinned and stitched the horizontal red strip. I measured carefully to ensure that it was centered on the white one.
Finally, it was time to affix the vertical red strip. Again, I measured carefully to make sure that it was centered.
I love how the pattern turned out!
Next, it was time for the ruffle. I folded the ruffle piece in half so it was 144 x 3 inches. Then I ironed it to keep the fold nice and crisp. My Mom's sewing machine has a really cool gathering foot, so I used that to help gather the ruffle together.
I pinned the ruffle around the edges of the front piece and sewed with a 1-inch seam allowance around the edges.
This is what the pillow front looked like with the ruffle attached:
For the back, I folded, ironed and stitched each piece on one side, to ensure a finished look. I pinned each piece over the ruffles to create the envelope back. Make sure that the back pieces overlap each other by a couple of inches. When I sewed the back on, I used the seam from the ruffle as a guide of where to sew the pieces together. I'm not going to lie - the corners were a bit difficult to sew through, because the fabrics were so thick. I love how the back of the pillow front looks with the different colored threads!
Before I turned the pillow right-side out, I trimmed all of the edges so they weren't so bulky.
And...voila!
This pillow turned out to be so beautifully. I am a little sorry that I didn't make one for myself!
And my friend, well, she loves it, too! Here is a picture of the pillow on her couch. You can see it is in good company.
And a picture of my friend, Heather, posing with her Christmas gift.
Cheers!
Jenn
